DIY Mirrored Closet Doors Design
DIY mirrored closet doors are an easy improvement to do in any home, and it takes some time. Doors are usually used as wardrobe doors, and they add a touch of elegance to any room. If you have sliding wardrobe doors common in many older homes, remove them and install doors is an upgrade many will appreciate, especially if you plan to sell the house.
Measure the length and width of the wardrobe opening. DIY mirrored closet doors make sure to order a style that is an inch less than the actual width of your wardrobe and 1:59 inches shorter than the actual height wardrobe opening. Paint doors, if desired, before installation. Add the hardware to the doors, which includes the turntables and locking arms. Because each batch will vary depending on the style of the doors, your kit will have a chart so you know exactly where to place each part of the hardware.
Drill and install metal traces from the kit to the top of the DIY mirrored closet doors opening with the provided screws. Screw the brackets of the brackets into the floor directly under the roof cavity. Use a plank string to help you adjust the upper lane with the lower brackets. A lot is a metal or brass bulb attached to a string like when you hang up a vertical position, hanging down directly. It is a useful tool to use instead of using a level.